[ ]  冯宇阳，周蕾，刘磊，等. 38MnVS4微合金非调质钢涨断连杆控锻控冷工艺 [J]. 锻压技术，2020 ,45(12):1-6.

Feng Yuyang，Zhou Lei，Liu Lei，et al. Controlled forging and cooling process of expansion broken connecting rod for 38MnVS4 microalloy non-quenched and tempered steel [J]. Forging & Stamping Technology，2020 ,45(12):1-6.

[ ]  周玉龙，袁梦，周永松，等. 航空航天复杂环锻件生产动态扰动因素的智能管控技术 [J]. 锻压技术，2020 ,45(12):7-14.

Zhou Yulong，Yuan Meng，Zhou Yongsong, et al. Intelligent management and control technology for dynamic disturbance factors in production of complex ring forgings in aerospace [J]. Forging & Stamping Technology，2020 ,45(12):7-14.

[ ]  王康，袁海伦，史宇麟. 海洋打桩锤大型锻件下砧座的近净成形工艺优化 [J]. 锻压技术，2020 ,45(12):15-20.

Wang Kang，Yuan Hailun, Shi Yulin. Optimization on near net forming process for lower anvil of large forgings for marine pile hammer [J]. Forging & Stamping Technology，2020 ,45(12):15-20.

[ ]  王飞龙. 大扁豆花纹板轧辊孔型设计合理性评价及验证 [J]. 锻压技术，2020 ,45(12):21-27.

Wang Feilong. Evaluation and verification of design rationality for roll pass of large lentil-shaped checkered plate [J]. Forging & Stamping Technology，2020 ,45(12):21-27.

[ ]  裴永生，张世哲，孟宁. QP980超高强钢A柱补强板冲压成形性能分析 [J]. 锻压技术，2020 ,45(12):28-33.

Pei Yongsheng，Zhang Shizhe，Meng Ning. Analysis of stamping performance of A-pillar reinforcement plate for QP980 ultra-high strength steel [J]. Forging & Stamping Technology，2020 ,45(12):28-33.

[ ]  冯翠云. 铝箔盒形件成形数值模拟及模具设计 [J]. 锻压技术，2020 ,45(12):34-39.

Feng Cuiyun. Numerical simulation and die design on box-shaped parts of aluminum foil [J]. Forging & Stamping Technology，2020 ,45(12): 34-39.

[ ]  王金刚，赵文凯，刘旭洋，等. 基于Deform的椭圆形封头热冲压成形有限元分析及优化 [J]. 锻压技术，2020 ,45(12):40-45.

Wang Jingang，Zhao Wenkai，Liu Xuyang，et al. Finite element analysis and optimization on hot stamping of oval head based on Deform [J]. Forging & Stamping Technology，2020 ,45(12): 40-45.

[ ]  胡锦达. 汽车后围内板冲压工艺的高斯扰动粒子群优化 [J]. 锻压技术，2020 ,45(12):46-52.

Hu Jinda. Stamping process optimization of automobile rear inner panel based on Gaussian perturbation particle swarm [J]. Forging & Stamping Technology，2020 ,45(12): 46-52.

[ ]  曾晓亮，吴琼，袁旭华. 二维矩形件排样问题的自适应多岛遗传算法优化 [J]. 锻压技术，2020 ,45(12):53-58.

Zeng Xiaoliang，Wu Qiong，Yuan Xuhua. Adaptive multi-island genetic algorithm optimization on layout problem for 2D rectangular parts [J]. Forging & Stamping Technology，2020 ,45(12): 53-58.

[ ]  岳太文，陈晓辉，门正兴，等. 6061铝合金板数控单点渐进温成形工艺多目标优化 [J]. 锻压技术，2020 ,45(12):59-64.

Yue Taiwen，Chen Xiaohui，Men Zhengxing，et al. Mulit-objective optimization on NC single point incremental warm forming process for 6061 aluminum alloy sheet [J]. Forging & Stamping Technology，2020 ,45(12): 59-64.

[ ]  唐妍，周宏钟. 38MnVS4微合金非调质钢涨断连杆控锻控冷工艺 [J]. 锻压技术，2020 ,45(12):65-71.

Tang Yan，Zhou Hongzhong. Numerical simulation and springback compensation of stamping for door frame [J]. Forging & Stamping Technology，2020 ,45(12): 65-71.

[ ]  赵艳华，杨俊雄. 轨道车辆帽形截面不锈钢弯梁冲压成形工艺 [J]. 锻压技术，2020 ,45(12):72-77.

Zhao Yanhua，Yang Junxiong. Stamping process of stainless steel curved beam with hat-shaped section for rail vehicle [J]. Forging & Stamping Technology，2020 ,45(12): 72-77.

[ ]  魏子豪，朱春东，郑淇文，等. 基于Dynaform的Strenx960高强钢折弯工艺影响因素分析 [J]. 锻压技术，2020 ,45(12):78-84.

Wei Zihao，Zhu Chundong, Zheng Qiwen, et al. Analysis on influencing factors of bending process for Strenx960 high-strength steel based on Dynaform  [J]. Forging & Stamping Technology，2020 ,45(12): 78-84.

[ ]  方赫，陆振东，宿彪，等. 基于Plant Simulation的冲压车间仿真优化 [J]. 锻压技术，2020 ,45(12):85-89.

Fang He，Lu Zhendong，Su Biao，et al. Simulation optimization on stamping workshop based on Plant Simulation [J]. Forging & Stamping Technology，2020 ,45(12): 85-89.

[ ]  张峰，王明，孙伟领，等. 尾门外板的质量稳定性分析 [J]. 锻压技术，2020 ,45(12):90-94.

Zhang Feng，Wang Ming，Sun Weiling，et al. Quality stability analysis on tailgate outer panel [J]. Forging & Stamping Technology，2020 ,45(12): 90-94.

[ ]  黄小康，晁特，管延锦. 基于正交试验的冷轧钢管模具设计参数优化 [J]. 锻压技术，2020 ,45(12):95-101.

Huang Xiaokang，Chao Te，Guan Yanjin. Optimization on die design parameters of cold-rolled steel pipe based on orthogonal test [J]. Forging & Stamping Technology，2020 ,45(12): 95-101.

[ ]  朱英霞，施伟，涂文斌，等. 不同试样对TA2/T2双金属复合管绕弯成形回弹模拟的适用性研究 [J]. 锻压技术，2020 ,45(12):102-109.

Zhu Yingxia，Shi Wei，Tu Wenbin，et al. Research on applicability of different specimens to springback simulation of rotary-draw bending for TA2/T2 bimetal composite tube [J]. Forging & Stamping Technology，2020 ,45(12): 102-109.

[ ]  刘鑫，朱春东，孙少东，等. 多锥辊摆辗大直径薄圆盘数值模拟及成形工艺分析 [J]. 锻压技术，2020 ,45(12):110-115.

Liu Xin，Zhu Chundong，Sun Shaodong, et al. Numerical simulation and forming process analysis on rotary forging with multi-cone rolls for large diameter thin disc [J]. Forging & Stamping Technology，2020 ,45(12): 110-115.

[ ]  徐伟，万轶，沙鑫美. 渐进成形工艺参数的分阶段扰动粒子群算法优化 [J]. 锻压技术，2020 ,45(12):116-121.

Xu Wei，Wan Yi，Sha Xinmei. Optimization on incremental forming process parameters based on staged perturbation particle swarm algorithm  [J]. Forging & Stamping Technology，2020 ,45(12): 116-121.

[ ]  陈磊，吴济发，王宗申，等. 伺服直驱螺旋压力机结构分析与优化设计 [J]. 锻压技术，2020 ,45(12):122-129.

Chen Lei，Wu Jifa，Wang Zongshen，et al. Structural analysis and optimization design on servo direct drive screw press [J]. Forging & Stamping Technology，2020 ,45(12): 122-129.

[ ]  张南，刘庆生，曾琦，等. 基于产品系列型谱的锻造自动化生产制造系统设计方法 [J]. 锻压技术，2020 ,45(12):130-135.

Zhang Nan，Liu Qingsheng，Zeng Qi，et al. Design method on automated production and manufacturing system of forging based on product series spectrum [J]. Forging & Stamping Technology，2020 ,45(12): 130-135.

[ ]  于仁萍，司国雷. 电子产品复杂支架多工位级进模设计 [J]. 锻压技术，2020 ,45(12):136-140.

Yu Renping，Si Guolei. Design on multi-station progressive die for complex bracket of electronic product [J]. Forging & Stamping Technology，2020 ,45(12): 136-140.

[ ]  宫晓峰，于仁萍，邢勤. 汽车内部加强件复杂多工位连续模设计 [J]. 锻压技术，2020 ,45(12):141-145.

Gong Xiaofeng，Yu Renping，Xing Qin. Design on complex multi-position progressive die for automotive interior reinforcement [J]. Forging & Stamping Technology，2020 ,45(12): 141-145.

[ ]  陈加国，匡余华. 接线固定支架多工位级进模设计 [J]. 锻压技术，2020 ,45(12):146-150.

Chen Jiaguo，Kuang Yuhua. Design on multi-position progressive die for wire fixing bracket [J]. Forging & Stamping Technology，2020 ,45(12): 146-150.

[ ]  李静，唐鹏，伏思静. 一种托片级进模设计 [J]. 锻压技术，2020 ,45(12):151-154.

Li Jing，Tang Peng，Fu Sijing. Design of progressive die for a kind of supporting plate [J]. Forging & Stamping Technology，2020 ,45(12): 151-154.

[ ]  杨彩红，陈志成，徐艳滕. 机械传动机构在汽车排气管卡箍级进模中的应用 [J]. 锻压技术，2020 ,45(12):155-159.

Yang Caihong，Chen Zhicheng，Xu Yanteng. Application of mechanical transmission mechanism in progressive die of automobile exhaust pipe clamp [J]. Forging & Stamping Technology，2020 ,45(12): 155-159.

[ ]  孙鹏. 弹性夹片冲压工艺分析与模具设计 [J]. 锻压技术，2020 ,45(12):160-164.

Sun Peng. Analysis of stamping process and die design for elastic clip [J]. Forging & Stamping Technology，2020 ,45(12): 160-164.

[ ]  孙伟领，李伟，韦韡，等. 基于激光测距传感器的覆盖件轮廓检测 [J]. 锻压技术，2020 ,45(12):165-170.

Sun Weiling，Li Wei，Wei Wei，et al. Detection on cover contour based on laser ranging sensor [J]. Forging & Stamping Technology，2020 ,45(12): 165-170.

[ ]  程喆，钱东升，邓加东. 2219铝合金构筑成形工艺实验与界面愈合规律 [J]. 锻压技术，2020 ,45(12):171-177.

Cheng Zhe，Qian Dongsheng，Deng Jiadong. Additive forming process experiment and interface healing law for 2219 aluminum alloy  [J]. Forging & Stamping Technology，2020 ,45(12): 171-177.

[ ]  武建国，安红萍，刘俐利，等. 基于摩擦修正的SA508-3钢高温本构方程 [J]. 锻压技术，2020 ,45(12):178-182.

Wu Jianguo，An Hongping，Liu Lili，et al. High-temperature constitutive equation of SA508-3 steel based on friction correction [J]. Forging & Stamping Technology，2020 ,45(12): 178-182.

[ ]  王立颖，杨友，刘春兰. 热机械加工Ti-6Al-4V钛合金的流变行为和显微组织演变 [J]. 锻压技术，2020 ,45(12):183-191.

Wang Liying, Yang You, Liu Chunlan. Rheological behavior and microstructure evolution on Ti-6Al-4V titanium alloy by hot machining  [J]. Forging & Stamping Technology，2020 ,45(12): 183-191.

[ ]  郭炜，谌昀，姜江,等. 退火温度对拉拔Cu-14Fe合金微观组织和性能的影响 [J]. 锻压技术，2020 ,45(12):191-194.

Guo Wei，Shen Yun，Jiang Jiang，et al. Influence of annealing temperature on microstructure and properties for drawn Cu-14Fe alloy [J]. Forging & Stamping Technology，2020 ,45(12): 191-194.

[ ]  宋晓俊，王超渊，汪煜，等. 挤压态镍基粉末高温合金微观组织分析 [J]. 锻压技术，2020 ,45(12):195-202.

Song Xiaojun，Wang Chaoyuan，Wang Yu，et al. Microstructure analysis on extruded nickel-based powder superalloy  [J]. Forging & Stamping Technology，2020 ,45(12): 195-202.

[ ]  孙常奋，许久海，袁志强. 微量元素对大型船用柴油机连杆疲劳强度的影响 [J]. 锻压技术，2020 ,45(12):203-206.

Sun Changfen，Xu Jiuhai，Yuan Zhiqiang. Effect of trace elements on fatigue strength of connecting rods for large marine diesel engine [J]. Forging & Stamping Technology，2020 ,45(12): 203-206.

[ ]  葛志锐，余兆国，陆佳，等. 城市轨道交通接触网铜合金锻件缺陷分析及改良 [J]. 锻压技术，2020 ,45(12):207-211.

Ge Zhirui，Yu Zhaoguo，Lu Jia，et al. Defect analysis and improvement on copper alloy forgings for urban rail transit contact network [J]. Forging & Stamping Technology，2020 ,45(12): 207-211.